Front Wiper Motor

WIPER AND WASHER: FRONT WIPER MOTOR: INSPECTION

INSPECTION

1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY





(a) LO Operation Check
(1) Connect the battery (+) to terminal 1 (+1) of the connector, the battery (-) to terminal 5 (E) of the connector, and check that the motor operates with low speed (LO).
(b) HI Operation Check
(1) Connect the battery (+) to terminal 4 (+2) of the connector, the battery (-) to terminal 5 (E) of the connector, and check that the motor operates with high speed (HI).
(c) Automatic Stop Operation Check
(1) Connect the battery (+) to terminal 1 (+1) of the connector, the battery (-) to terminal 5 (E) of the connector. With the motor being rotated at low speed (LO), disconnect terminal 1 (+1) to stop the wiper motor operation at any position except the automatic stop position.
(2) Using a SST, connect terminal 1 (+1) and 3 (S), and the battery (+) to terminal 2 (B) to restart the motor operation at low speed.
SST: 09843-18040




(3) Check the automatic stop position.
Standard:
See the illustration.