Rear Wiper Motor

WIPER AND WASHER: REAR WIPER MOTOR: INSPECTION

INSPECTION

1. INSPECT REAR WIPER MOTOR ASSEMBLY





(a) Operation Check
(1) Connect the battery (+) to terminal 1 (+B) of the connector and the battery (-) to terminal 3 (+1) of the connector, and check that the rear wiper motor operates.
NOTE:
The body earth should be connected.





(b) Automatic Stop Position Operation Check
(1) Connect the battery (+) to terminal 1 (+B) of the connector and the battery (-) to terminal 3 (+1) of the connector.
NOTE:
The body earth should be connected.
(2) With the motor being rotated, disconnect terminal 1 (+B) and terminal 3 (+1) to stop the motor operation at any position except the automatic stop position.
(3) Connect the battery (+) to terminal 1 (+B). Check that the motor is restarted and automatically stopped.