Headlamp Relay: Testing and Inspection

LIGHTING (EXT): RELAY: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT HEADLIGHT RELAY (HEAD HI, HEAD LO)
(a) Remove the engine room side cover LH Removal.





(b) Remove the headlight relay from the engine room relay box.





(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





If the result is not as specified, replace the relay.
(d) Install the headlight relay to the engine room relay box.
(e) Install the engine room side cover LH Installation.
2. INSPECT FOG LIGHT RELAY (FR FOG)
(a) Remove the engine room side cover LH Removal.





(b) Remove the fog light relay from the engine room relay box.





(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





If the result is not as specified, replace the relay.
(d) Install the fog light relay to the engine room relay box.
(e) Install the engine room side cover LH Installation.
3. INSPECT STOP LIGHT CONTROL RELAY ASSEMBLY
(a) Remove the No. 1 under cover Removal.





(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:





If *1 and *2 are normal and *3 is not as specified, replace the stop light control relay assembly.
(c) Install the No. 1 under cover Installation.