B1486

HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1486/86: Driver Side Air Outlet Damper Control Servo Motor Circuit
B1486/86 - Driver Side Air Outlet Damper Control Servo Motor Circuit

DESCRIPTION

The air outlet damper servo motor (for rear seat mode) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper to any position, which controls the air outlet changes.

HINT
Confirm that no mechanical problem is present because this trouble code can be stored when either a damper link or damper is mechanically locked.





WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM (AIR OUTLET DAMPER SERVO MOTOR)

(a) Use the Data List to check if the servo motor is functioning properly.

Air Conditioner





OK:

The display is as specified in the normal condition.

NG -- REPLACE AIR OUTLET DAMPER SERVO MOTOR

OK -- REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Removal

2. REPLACE AIR OUTLET DAMPER SERVO MOTOR

(a) Replace the air outlet damper servo motor (for rear seat mode) Disassembly.

HINT
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.

NEXT -- Continue to next step.

3. CHECK FOR DTC

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Check for DTCs Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC B1486 is not output.

NG -- REPLACE AIR CONDITIONING HARNESS ASSEMBLY Disassembly

OK -- REPLACE AIR OUTLET DAMPER SERVO MOTOR Disassembly