Trunk / Liftgate Lock: Testing and Inspection

DOOR LOCK: BACK DOOR LOCK: INSPECTION

1. INSPECT BACK DOOR LOCK ASSEMBLY





(a) Set the back door lock to the full-latch position.

(b) Apply battery voltage to the door motor connector and check the operation of the door lock motor.

OK:





* If the result is not as specified, replace the back door lock assembly.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





* If the result is not as specified, replace the back door lock assembly.

2. INSPECT BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)

(a) Inspect the closer motor operation.





(1) Set the back door lock assembly to the full-latch position.

(2) Apply battery voltage and check the operation of the door lock motor.

OK:





* If the result is not as specified, replace the back door lock assembly.

(3) Set the back door lock assembly to the half-latch position.

(4) Apply battery voltage and check the operation of the door lock motor.

OK:





* If the result is not as specified, replace the back door lock assembly.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Closer Position Switch:





Back Door Courtesy Switch:





* If the result is not as specified, replace the back door lock assembly.