Removal
1UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
2. REMOVE UPPER RADIATOR SUPPORT SEAL Removal
3. REMOVE FAN AND GENERATOR V BELT
(a) While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar with a diameter of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.
Text in Illustration
HINT
The pulley bolt for the belt tensioner has a left-hand thread.
(b) Remove the fan and generator V belt.