Radio, Stereo, and Compact Disc

DIAGNOSTIC TROUBLE CODE CHART




1. GATEWAY ECU (Physical address: 1C4)

HINT:
*1: When 210 Sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.




Logical address: 01 (Communication control)

2. RADIO AND PLAYER (Physical address: 190)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: This code is stored when 180 sec. has passed after the power supply connector is pulled out after engine start.
- *3: This code may be stored when the engine key is turned again 1 min. after engine start.
- *4: This code may be stored when the engine key is turned again after engine start.
- *5: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

Part 1:

Part 2:

a. Logical address: 01 (Communication control)




b. Logical address: 61 (Cassette switch)




c. Logical address: 63 (In-dash CD changer)

3. STEREO COMPONENT AMPLIFIER (Physical address: 440)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code be stored when the engine key is turned again 1 mm. after engine start.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

Part 1:

Part 2:

Logical address: 01 (Communication control)

4. STEREO COMPONENT TURNER (Physical address: 1FO)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code may be stored when the engine key is turned again 1 min. after engine start.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

Part 1:

Part 2:

Logical address: 01 (Communication control)

5. AUDIO AND A/C CONTROL SWITCH (Physical address: 1CO)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code may be stored when the engine key is turned again 1 min after engine start.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: When 210 Sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

Part 1:

Part 2:

Logical address: 01 (Communication control)