P060B

2UR-GSE ENGINE CONTROL: SFI SYSTEM: P060B: Internal Control Module A/D Processing Performance

DTC P060B - Internal Control Module A/D Processing Performance

DESCRIPTION

This DTC is output when a communication error occurs in the ECM.






MONITOR STRATEGY





TYPICAL ENABLING CONDITIONS





TYPICAL MALFUNCTION THRESHOLDS





INSPECTION PROCEDURE

PROCEDURE

1. READ OUTPUT DTC (DTC P060B)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream ON.
(d) Clear DTCs DTC Check / Clear.
(e) Turn the engine switch to off and turn the Techstream off.
(f) Disconnect the Techstream.
(g) Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
(h) Connect the cable to the negative (-) battery terminal.
(i) Connect the Techstream to the DLC3.
(j) Turn the engine switch on (IG).
(k) Turn the Techstream ON.
(l) Enter the following menus: Powertrain / Engine / Trouble Codes.
(m) Read the DTCs.
Result:






C -- GO TO DTC (P0327, P0328, P032C, P032D, P0332, P0333, P033C and P033D)
B -- REPLACE ECM
A -- CHECK FOR INTERMITTENT PROBLEMS