Removal

AUDIO / VISUAL: RADIO ANTENNA CORD: REMOVAL

1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

(a) Remove the instrument panel safety pad assembly Removal.

2. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT Disassembly

3. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT Disassembly

4. REMOVE DEFROSTER NOZZLE ASSEMBLY Disassembly

5. REMOVE NO. 1 HEATER TO REGISTER DUCT Disassembly

6. REMOVE NO. 2 HEATER TO REGISTER DUCT Disassembly

7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

(a) Disengage the 5 clamps and remove the No. 2 antenna cord sub-assembly.





8. REMOVE ROOF HEADLINING ASSEMBLY

(a) Remove the roof headlining assembly Removal.

9. REMOVE ANTENNA CORD SUB-ASSEMBLY

(a) Peel the strips of the tape used to secure the antenna cord only to the extent that allows removal of the antenna cord.

HINT
Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

(b) Remove the antenna cord from the roof headlining.