Removal

PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL

HINT
* Use the same procedures for the No. 2 parking brake cable assembly and No. 3 parking brake cable assembly.
* The procedures listed below are for the No. 3 parking brake cable assembly.
1. REMOVE PARKING BRAKE PEDAL ASSEMBLY

HINT
Refer to the procedures up to "REMOVE PARKING BRAKE PEDAL". Removal

2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY Disassembly

3. REMOVE CROSS MEMBER FLOOR NO. 4 REINFORCEMENT SUB-ASSEMBLY

(a) Remove the 8 bolts and the cross member floor No. 4 reinforcement sub-assembly.

4. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

5. SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY

(a) Separate the No. 2 parking brake cable assembly from the parking brake equalizer.

6. REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY

(a) Slide the rubber boot as shown in the illustration.

(b) Remove the No. 4 parking brake cable assembly from the parking brake equalizer as shown in the illustration.

7. REMOVE EXHAUST TAIL PIPE ASSEMBLY Removal

8. REMOVE EXHAUST CENTER PIPE ASSEMBLY Removal

9. REMOVE REAR WHEEL

10. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY Disassembly

11. REMOVE REAR DISC Disassembly

12. REMOVE PARKING BRAKE SHOE RETURN TENSION NO. 1 SPRING Disassembly

13. REMOVE PARKING BRAKE SHOE STRUT Disassembly

14. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY Disassembly

15. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET Disassembly

16. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY Disassembly

17. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the backing plate.

(b) Using needle-nose pliers, remove the clip from the No. 3 parking brake cable assembly.

(d) Remove the No. 3 parking brake cable assembly from the body.

(e) Remove the parking brake cable clamp.