Odo/Trip Switch Malfunction

METER: METER / GAUGE SYSTEM: Odo/Trip Switch Malfunction
- Odo/Trip Switch Malfunction

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK MULTIPLEX COMMUNICATION SYSTEM

(a) Check the DTC Multiplex Communication System.

Result:





B -- GO TO MULTIPLEX COMMUNICATION SYSTEM Multiplex Communication System
A -- Continue to next step.

2. READ VALUE USING TECHSTREAM (ODO/TRIP CHANGE SWITCH, TRIP RESET SW)

(a) Connect the Techstream to the DLC3.

(b) Power switch on (IG).

(c) Turn the tester ON.

(d) Enter following menus: Body Electrical / D-SEAT SW / Data List.

(e) Check the values by referring to the table below.

D-SEAT SW:





OK:

Switch condition (ON/OFF) can be switched by actual operation.

NG -- REPLACE INTEGRATION CONTROL AND PANEL

OK -- REPLACE COMBINATION METER