Removal

2GR-FE EMISSION CONTROL: CANISTER: REMOVAL

1. REMOVE FUEL TANK ASSEMBLY

HINT
Removal

2. REMOVE CHARCOAL CANISTER ASSEMBLY

(a) Disconnect the fuel tank vent hose from the charcoal canister.





(1) Push the connector deep inside.

(2) Pinch portion A.

(3) Pull out the connector.

(b) Disconnect the charcoal canister filter sub-assembly from the charcoal canister.





(1) Push the connector deep inside.

(2) Pinch portion A.

(3) Pull out the connector.

(c) Disconnect the vapor pressure sensor connector.

(d) Disconnect the wire harness clamp.

(e) Disconnect the purge line hose from the charcoal canister.

(f) Remove the 2 bolts, clip and charcoal canister.