Removal

WIPER / WASHER: FRONT WIPER MOTOR: REMOVAL

1. REMOVE FRONT WIPER ARM HEAD CAP

(a) Using a screwdriver, disengage the 3 claws and remove the front wiper arm head cap.





Text in Illustration





HINT
Tape the screwdriver tip before use.

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

(a) Remove the nut and the front wiper arm and blade assembly LH.





3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

(a) Remove the 2 nuts and the front wiper arm and blade assembly RH.





4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

(a) Remove the 2 clips.





(b) Disengage the 6 claws and guide [A] as shown in the illustration.





(c) Disengage the 8 guides [B] and 2 guides [C], and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.

5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Operate the wiper and stop the windshield wiper motor at the automatic stop position.

(b) Disconnect the connector.





(c) Disengage the 2 clamps.

(d) Remove the 3 bolts.

(e) Disengage the grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

Text in Illustration





NOTICE:
Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

6. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY

(a) Using a screwdriver, separate the No. 1 rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.





Text in Illustration





HINT
Tape the screwdriver tip before use.

(b) Remove the nut and the front wiper crank sub-assembly.





7. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

(a) Remove the 3 bolts and the windshield wiper motor assembly.