Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL STEERING PAD ATTACHING SCREW

(a) Install the 2 steering pad attaching screws to the lower steering wheel boss cover.





2. INSTALL LOWER STEERING WHEEL BOSS COVER

(a) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.





(b) Install the 2 screws.





3. INSTALL SHIFT PADDLE SWITCH (w/ Shift Paddle Switch)

(a) Install the shift paddle switch Installation for A760E, for A960E).

4. INSTALL CRUISE CONTROL SWITCH WIRE

5. INSTALL CRUISE CONTROL MAIN SWITCH Installation

6. INSTALL STEERING PAD SWITCH ASSEMBLY Installation

7. INSTALL STEERING SHAKE DAMPER

(a) Install the steering shake damper to the steering wheel assembly with the 2 screws.





Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

8. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

9. ADJUST SPIRAL CABLE Installation

10. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft.





Text in Illustration





(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

(c) Connect the connectors to the spiral cable sub-assembly.

11. INSTALL STEERING PAD Installation

12. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

13. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

14. INSPECT STEERING WHEEL CENTER POINT

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.
* Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.

16. INSPECT STEERING PAD Installation

17. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.