Removal and Replacement

Flexplate

Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the transaxle. For additional information, refer to Automatic Transaxle/Transmission - 6F50/6F55 Removal.

3. Remove the 8 bolts and the flexplate.

Installation

1. NOTE: One of the 8 flexplate holes are offset so the flexplate can only be installed in one position.

Install the flexplate and the 8 bolts.

- Tighten in the sequence shown to 80 Nm (59 lb-ft).





2. Install the transaxle. For additional information, refer to Automatic Transaxle/Transmission - 6F50/6F55 Installation.