Instrument Cluster Finish Panel

Instrument Cluster Finish Panel









1. Position the selector lever in the 1st gear position.

2. NOTE: The ignition switch must be in the OFF position if disconnecting the Passenger Air Bag Deactivation (PAD) indicator electrical connector. Otherwise, a DTC will be set in the Restraints Control Module (RCM) memory and must be cleared before releasing the vehicle.

Position the ignition switch in the OFF position and wait at least one minute.

3. Position the steering column to the full down position.

4. Remove the instrument cluster finish panel screws.

5. Release the retainers and position the instrument cluster finish panel aside.

6. Remove the instrument cluster finish panel and disconnect the electrical connector.

7. To install, reverse the removal procedure.