Navigation Display: Service and Repair

CAR-NAVIGATION UNIT REMOVAL/INSTALLATION

Without Integrated Multi Information Display

CAUTION:
- When installing the car-navigation unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard.If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.
- Pressing the switch area of the car-navigation unit when installing it could result in a malfunction. Therefore only press the hatched area shown in the figure.






1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Decoration panel Decoration Panel Removal/Installation

b. Center panel Center Panel Removal/Installation

3. Remove in the order indicated in the table.









4. Install in the reverse order of removal.

With Integrated Multi Information Display

1. Refer to Service and Repair