Hydraulic Control Assembly - Antilock Brakes: Testing and Inspection

ABS HU/CM INSPECTION
1. Remove the battery and battery tray.





2. Connect the Special Service Tool (SST) between the ABS/TCS HU/CM (with TCS) or ABS HU/CM (without TCS) and harness connector with the ignition switch off.

















3. Attach the tester leads to the SST to inspect voltage by referring the tables.
Terminal voltage table (reference value) (Ignition switch is at ON, and connector is connected unless indicated otherwise)

Caution In the event that the vehicle is to be inspected while it is being driven, make sure that the SST harness does not Interfere with parts in the engine room.