Spoiler: Service and Repair

REAR SPOILER REMOVAL/INSTALLATION

4SD

1. Remove the trunk lid trim. (See )

2. Remove the nuts.






3. While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the rear spoiler from the trunk lid.






WARNING:
- Using a razor with bare hands can cause injury. Always wear gloves when using a razor.

4. Pull the rear spoiler in the direction of arrow in the order of (1), (2) and (3), then remove the clips from the trunk lid.






5. Remove the rear spoiler.

6. Install in the reverse order of removal.
NOTE:
- Attach double-sided adhesive tape to the rear spoiler as shown in the figure.






5HB

Except Mazdaspeed 3

1. Disconnect the negative battery cable.

2. Remove the liftgate upper trim.

3. Remove the caps.

4. Remove the nut A and B.






5. Pull the rear spoiler in the direction of arrow, then remove the clips C and D from the liftgate.






6. Remove the rear spoiler.

7. Install in the reverse order of removal.

Mazdaspeed 3

1. Disconnect the negative battery cable.

2. Remove the liftgate upper trim.

3. Remove the caps.

4. Remove the nut A and B.






5. Pull the rear spoiler in the direction of arrow, then remove the clips C and D from the liftgate.






6. Remove the rear spoiler.

7. Install in the reverse order of removal.