2.0 (Pneumatic Lines with Actuators and RTR Control Valve)

Preparation for Test:
1. Disconnect pneumatic line connected to connector F of pneumatic distributor.
2. Connect tester to disconnected pneumatic line using rubber hose, part no.007 997 61 82.
3. Remove trunk lid lock, do not disconnect pneumatic line.
4. Apply battery voltage to RTR control valve (Y65/3).


NOTE: After testing, reconnect prior disconnected pneumatic line using rubber hose part no.007 997 61 82 to pneumatic distributor.


Parts Required for Test:
1 Rubber hose, 50 mm long 007 997 61 82

Parts Required for Repair:
Rubber hose (as necessary) 007 997 61 82

Step 2.0: