Without Scan Tool

OBD-II SELF-DIAGNOSTIC PROCEDURE (WITH GST)
Refer to "Generic Scan Tool (GST) Function".

OBD-II SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)
Refer to "Malfunction Indicator Lamp (MIL)".

TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)
1. CHECK A/T CHECK (POSITION) INDICATOR LAMP





1. Move selector lever to P position. Start engine and warm it up to normal engine operating temperature.
2. Turn ignition switch to OFF position.
3. Wait 5 seconds.
4. Turn ignition switch to ON position. (Do not start engine.)





5. Does A/T check (position) indicator lamp come on for about 2 seconds?
Yes or No
Yes >> GO TO 2.
No >> Stop procedure. Perform AT-216, "1. A/T Check (Position) Indicator Lamp Does Not Come On" before proceeding. A/T Check (Position) Indicator Lamp Does Not Come on

2. JUDGEMENT PROCEDURE STEP 1





1. Turn ignition switch to OFF position.
2. Push and hold shift lock button.
3. Depress the brake pedal, then move gear selector lever from P to 3 position.
4. Wait 3 seconds.





5. Move selector lever to 2 position.
6. Release brake pedal.
>> GO TO 3.

3. JUDGEMENT PROCEDURE STEP 2
1. Move selector lever to 1 position.
2. Depress brake pedal.
3. Depress accelerator pedal fully and release it.





4. The A/T check (position) indicator lamp will begin to flash.
>> GO TO 4.

4. CHECK SELF-DIAGNOSTIC CODE





Check A/T check (position) indicator lamp.
Refer to "JUDGEMENT OF SELF-DIAGNOSIS CODE".
>> DIAGNOSIS END











JUDGEMENT OF SELF-DIAGNOSIS CODE