Drive Belt: Testing and Inspection

Checking Drive Belts





WARNING: Inspect and check the drive belts with the engine off.

1. Inspect belt for cracks, fraying, wear or oil adhesion. If necessary, replace with a new one.
2. Inspect drive belt deflections by pushing on the belt midway between pulleys.
3. Rotate the crankshaft pulley two times then check the drive belt tension using Tool.
Tool number: - (BT-3373-F)

NOTE:
^ Inspect the drive belt deflection and tension when the engine is cold.
^ Adjust if the belt deflections exceed the limit or if belt tension is not within specifications.