Shift Linkage: Service and Repair
CONTROL LINKAGETM-21 Exploded View:
Removal and Installation
REMOVAL
1. Shift control lever to the neutral position.
2. Remove the air filter assembly.
3. Remove the shift cable from the shift lever and cable bracket.
4. Remove the select cable from the select lever and cable bracket.
5. Remove the center console.
6. Remove the shift cable from the control device assembly
7. Remove the select cable from the control device assembly
8. Remove the bracket covering the retainer grommet.
9. Remove the retainer grommet bolts and retainer grommet.
10. Remove the shift cable and select cable from the vehicle.
11. Remove the control device assembly bolts and the control device assembly
INSTALLATION
Installation is in the reverse order of removal.
^ After assembly, make sure control lever automatically returns to Neutral when it is moved to 1st, 2nd, or Reverse.
^ When control lever is shifted to each position, make sure there is no binding or disconnection at each connection.