Shifter CVT: Adjustments

Adjustment of CVT Position

CAUTION: Make sure that parking brake is applied before adjustment.





1. Loosen the control cable nut (A) and place the manual lever (1) in "P" position.
2. Place selector lever in "P" position.
3. Push the control cable (2) in with a load of 9.8 N (approximately 1 kg, 2.2 lb). Release the control cable and temporarily tighten the control cable nut.

NOTE: Do not move the manual lever. Make sure the manual lever stays in the "P" position.

4. Tighten the control cable nut.

CAUTION: Secure the manual lever when tightening nut.

Control cable nut: Refer to CVT-167, "Removal and Installation". Removal and Replacement
5. Check the operation of the CVT. Refer to CVT-171, "Checking of CVT Position". Testing and Inspection