Consult-III Function (A/T)

CONSULT-III Function (A/T)
CONSULT-III can display each diagnostic item using the diagnostic test models shown following.

FUNCTION:

CONSULT-III REFERENCE VALUE

NOTICE:
1. The CONSULT-III electrically displays shift timing and lock-up timing (that is, operation timing of each solenoid).
Check for time difference between actual shift timing and the CONSULT-III display. If the difference is noticeable, mechanical parts (except solenoids, sensors, etc.) may be malfunctioning. Check mechanical parts using applicable diagnostic procedures.
2. Shift schedule (which implies gear position) displayed on CONSULT-III and that indicated in Service Manual may differ slightly. This occurs because of the following reasons:
- Actual shift schedule has more or less tolerance or allowance,
- Shift schedule indicated in Service Manual refers to the point where shifts start, and
- Gear position displayed on CONSULT-III indicates the point where shifts are completed.
3. Shift solenoid valve "A" or "B" is displayed on CONSULT-III at the start of shifting. Gear position is displayed upon completion of shifting (which is computed by TCM).

Part 1:

Part 2:

Part 3:

SELF-DIAGNOSTIC RESULT MODE
After performing AT-78, "Diagnosis Procedure without CONSULT-III, place check marks for results on the AT-40, "How to Perform Trouble Diagnosis for Quick and Accurate Repair".
Reference pages are provided following the items.