Sedan Without Intelligent Key

PRE-Inspection FOR DIAGNOSTIC


Vehicle Security Operation Check

1.Inspection START
Turn ignition switch "OFF" and pull out keyfob from key slot.

NOTE:
Before starting operation check, open front windows.
>> GO TO 2
2.CHECK SECURITY INDICATOR LAMP
1. Lock doors using keyfob or mechanical key.
2. Check that security indicator lamp illuminates for 30 seconds.
Security indicator lamp should illuminate.
OK >> GO TO 3
NG >> Perform diagnosis and repair. Refer to Sedan Without Intelligent Key.
3.CHECK ALARM FUNCTION
1. After 30 seconds, security indicator lamp will start to blink.
2. Open any door or hood before unlocking with keyfob or mechanical key, or open trunk lid without keyfob or mechanical key.
Do alarm function properly.
OK >> GO TO 4
NG >> Check the following.
- The vehicle security system does not phase in alarm mode. Refer to Sedan Without Intelligent Key.
- Alarm (horn, headlamp and hazard lamp) do not operate. Refer to Sedan Without Intelligent Key.
4.CHECK ALARM CANCEL OPERATION
Unlock any door or open trunk lid using keyfob or mechanical key.
Alarm (horn, headlamp and hazard lamp) should stop.
OK >> Inspection End.
NG >> Check door lock function. Refer to Sedan With Intelligent Key.