B2130

B2130 EEPROM





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1. STEP 1
Turn ignition switch ON.
GO TO 2
2. STEP 2
Check "Self diagnostic result" with CONSULT-III.
Is the DTC detected?
YES - Perform diagnosis procedure. Refer to "Diagnosis Procedure".
NO - Inspection End.




Diagnosis Procedure
1. PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check "Self diagnostic result" with CONSULT-III.
3. Erase the DTC.
4. Perform DTC confirmation procedure. Refer to "DTC Logic".
Is the DTC displayed again?
YES - GO TO 2
NO - Check intermittent incident. Refer to Intermittent Incident.
2. REPLACE DRIVER SEAT CONTROL UNIT
Replace driver seat control unit. Refer to Driver Seat Control Unit.
Inspection End.