Courtesy Lamp: Service and Repair

INTERIOR ROOM LAMP


Removal and Installation


MAP LAMP

Removal
1. Disconnect the negative battery terminal.





2. Release the metal clips and drop front edge of map lamp (1) away from headlining. Slide map lamp forward in vehicle to clear pawls at rear.

Arrow Indicates Vehicle front

3. Disconnect the connectors, then remove map lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Disconnect the negative battery terminal.





2. Using a suitable tool (3), remove map lamp lens (2) RH/LH.
3. Pull bulb (1) straight out to remove.

Map lamp bulb : 12V - 8W


VANITY MIRROR LAMP

Removal
The vanity mirror lamp is replaced as part of the sunvisor assembly. Refer to Service and Repair.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Disconnect the negative battery terminal.





2. Using a suitable tool (1), remove the vanity mirror lamp lens (RH/LH.)

3. Pull bulb (3) straight out to remove.

Vanity mirror lamp bulb : 12V - 1.4W


GLOVE BOX LAMP

Removal
1. Disconnect the negative battery terminal.





2. Remove the lower instrument glove box assembly (1). Refer to Removal And Installation.
3. Rotate glove box lamp socket (3) counterclockwise to remove.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Disconnect the negative battery terminal.
2. Remove glove box lamp socket (3).
3. Pull bulb (2) straight out to remove.

Glove box lamp bulb : 12V - 3.4W


STEP LAMP

Removal





1. Disconnect the negative battery terminal.
2. Insert a suitable tool between door finisher (2) and step lamp lens/socket (1) to release the pawls.
3. Disconnect the step lamp connector, then remove step lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Disconnect the negative battery terminal.
2. Remove the step lamp lens/socket.
3. Pull the bulb straight out to remove.

Step lamp bulb : 12V - 3.8W


FOOTWELL LAMP

Removal
1. Disconnect the negative battery terminal.





2. Grasp footwell lamp socket, then rotate counterclockwise to release from substrate (1).

NOTE:
Lamp socket is shown from passenger compartment side.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Disconnect the negative battery terminal.
2. Remove footwell lamp socket from substrate.
3. Pull bulb (2) straight out to remove.

Footwell lamp bulb : 12V - 3.4W


PERSONAL LAMP

Removal
The personal lamp (RH/LH) (1) is replaced as part of the headlining assembly. Refer to Service and Repair.






Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Disconnect the negative battery terminal.
2. Using a suitable tool, release the pawls and remove personal lamp lens (3)
3. Pull bulb (2) straight out to remove.

Personal lamp bulb : 12V - 8W