Front And Rear Window Anti-Pinch

POWER WINDOW MOTOR


DRIVER SIDE : Description

Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch.





POWER WINDOW MOTOR


DRIVER SIDE : Diagnosis Procedure

1. CHECK POWER WINDOW MOTOR
Check front power window motor LH. Refer to Front And Rear Window Anti-Pinch.
Is the inspection result normal?
YES - GO TO 2
NO - Replace power window motor LH. Refer to Removal and Installation.
2. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL





1. Disconnect front power window motor LH connector.
2. Turn ignition switch ON.
3. Check voltage between front power window motor LH connector D9 terminals 1, 2 and ground.






Is the inspection result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 3
3. CHECK HARNESS CONTINUITY





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch connector D7.
3. Check continuity between main power window and door lock/unlock switch connector D7 (A) terminals 8, 11 and front power window motor connector LH D9 (B) terminals 1, 2.





4. Check continuity between main power window and door lock/unlock switch connector D7 (A) terminals 8, 11 and ground.





Is the inspection result normal?
YES - Replace main power window and door lock/unlock switch. Refer to LH & RH Front Window Anti-Pinch.
NO - Repair or replace harness or connectors.