Windshield Washer Reservoir: Service and Repair

FRONT WIPER AND WASHER SYSTEM


Removal and Installation of Washer Fluid Reservoir


REMOVAL
1. Remove the washer fluid reservoir screw (A).





2. Remove the front fender protector RH. Refer to Component.
3. Detach the fog lamp harness clips (A) and remove the washer tube (1).





4. Disconnect the washer motor connector (C).
5. Remove the washer fluid reservoir screws (B), and remove washer reservoir (2).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
After installation, add water up to the upper level of washer fluid reservoir inlet, and check for water leaks.