Alternator: Service and Repair

CHARGING SYSTEM


Removal and Installation







REMOVAL
1. Disconnect the battery negative terminal. Refer to Removal and Replacement.
2. Remove drive belt. Refer to .
3. Disconnect generator connector.
4. Remove "B" terminal nut.
5. Remove generator bolts.
6. Remove generator assembly from the vehicle.

GENERATOR PULLEY INSPECTION
- Check that the generator pulley does not rattle.
- Check that the generator pulley nut is properly tightened.

Generator pulley nut : 118 N-m (12.0 kg-m, 87 ft-lb)

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Be sure to tighten "B" terminal nut carefully.