Receiver Dryer: Service and Repair

REFRIGERANT LINES


Removal and Installation of Liquid Tank


REMOVAL
1. Remove the condenser. Refer to Service and Repair.
2. Clean liquid tank and its surrounding area, and remove dirt and rust from liquid tank.

CAUTION:
Be sure to clean carefully.





3. Remove bolts (A) and (B) from liquid tank.
4. Remove liquid tank bracket (1) from protruding part of condenser (2).





5. Slide liquid tank (3) upward, and then remove liquid tank (3).

INSTALLATION
Installation is in the reverse order of removal.






CAUTION:
- Make sure liquid tank bracket (2) is securely installed at protrusion of condenser (3). [Make sure liquid tank bracket (2) does not move to a position below center of liquid tank (1).]
- Replace O-rings for A/C piping with new ones, and apply compressor oil when installing.
- When recharging refrigerant, check for leaks. Refer to Checking Of Refrigerant Leaks.