Windshield Washer Reservoir: Service and Repair

FRONT WIPER AND WASHER SYSTEM


Removal and Installation of Washer Tank


REMOVAL
1. Remove the front grille. Refer to Service and Repair .





2. Remove clip (A) and pull washer tank inlet (1) out of washer tank.
- Arrow indicates Vehicle Front
3. Remove the front bumper. Refer to Service and Repair .
4. Disconnect the washer motor connector and washer fluid level sensor connector.





5. Remove the washer tank screw (A).
- Arrow indicates Vehicle Front
6. Remove the washer tube (1), and remove washer tank (2) from the vehicle.
- Arrow indicates Vehicle Front

INSTALLATION
Installation is in the reverse order of removal.






CAUTION:
After installation, add water up to the upper level of washer tank inlet, and check for water leaks.