Carpet: Service and Repair

FLOOR TRIM


Removal and Installation












REMOVAL
1. Disconnect both the negative and positive battery terminals, then wait at least three minutes.
2. Remove front seat RH/LH and rear seat cushion. Driver Seat and Component Parts Drawing.
3. Remove floor console and bracket. Removal And Installation.
4. Remove parking brake control. Adjustments.
5. Remove center console lower finisher RH/LH and disconnect connector. Removal And Installation.
6. Remove front kicking plate RH/LH, center pillar lower finisher RH/LH, and both upper and lower rear kicking plates RH/LH. Body Side Trim.
7. Remove front seat belt lower anchor RH/LH. Front Seat Belt.
8. Remove diagnosis sensor unit. Service and Repair.
9. Remove floor carpet hook.
10. Remove instrument panel stay RH/LH. Removal And Installation.
11. Remove push pin clips, then pull out floor trim through door opening.
12. Remove floor spacer RH/LH/Rear.

INSTALLATION
Installation is in the reverse order of removal.