Removal And Installation

BRAKE PEDAL


Removal and Installation


REMOVAL
1. Remove the instrument lower cover (LH) and lower knee protector (LH). Exploded View.
2. Remove the console side finisher (LH). Exploded View.
3. Remove the accelerator pedal. Removal And Installation.
4. Disconnect the stop lamp switch and ASCD cancel switch connector.
5. Remove the stop lamp switch and ASCD cancel switch from the brake pedal assembly.
6. Remove the snap pin and clevis pin to disconnect the brake booster clevis from the brake pedal assembly.

CAUTION:
Do not reuse the snap pin and clevis pin.
7. Remove the brake booster clevis from the input rod.
8. Disconnect the steering column assembly pinch bolt to position the steering column assembly aside. Exploded View.
9. Remove the brake pedal assembly nuts.
10. Remove the brake pedal assembly.

INSTALLATION
Installation is in the reverse order of removal.
- Tighten the lock nut to the specified torque. Exploded View.
- Adjust the brake pedal height after installing the brake pedal assembly. Inspection and Adjustment.

CAUTION:
Do not reuse the snap pin and clevis pin.