Courtesy Lamp: Service and Repair

INTERIOR ROOM LAMP


Removal and Installation


FRONT ROOM/MAP LAMP ASSEMBLY (ALL EXCEPT SEDAN MODELS WITHOUT SUNROOF)

Removal









1. Release the metal clips and lower front edge of front room/map lamp assembly (1) down from the headlining. Slide front room/map lamp assembly forward in vehicle to clear pawls at rear.
2. Disconnect the connectors, then remove front room/map lamp assembly.

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool (A), remove front room/map lamp assembly lens or lenses (2) as necessary.
2. Pull bulb(s)(1) straight out to remove.

Front room/map lamp bulb : 12V - 8W

FRONT ROOM/MAP LAMP (SEDAN MODELS WITHOUT SUNROOF)

Removal
1. Remove the headlining. Removal And Installation Sedan.

CAUTION:
Headlining must be removed before removing front room/map lamp assembly.





2. Release the tabs, then remove electrical harness and switches
(A) from front room/map lamp assembly (1).





3. Using a suitable tool, release the 12 tabs and remove the retaining ring (1) from the front room/map lamp assembly and headlining.

White Arrow Indicates Vehicle front

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool (A), remove front room/map lamp assembly lens or lenses (2) as necessary.
2. Pull bulb(s)(1) straight out to remove.

Front room/map lamp bulb : 12V - 8W

VANITY MIRROR LAMP (If Equipped)

Removal
The vanity mirror lamp is replaced as part of the sunvisor assembly. Removal And Installation Coupe (Coupe) or Removal And Installation Sedan (Sedan).

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool (A), remove the vanity mirror lamp lens or lenses (2) as necessary.
2. Pull bulb(s)(3) straight out to remove.

STEP LAMP

Removal










1. Insert a suitable tool between door finisher and step lamp lens/socket to release the pawls.
2. Disconnect the step lamp connector, then remove step lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove the step lamp lens/socket.
2. Pull the bulb straight out to remove.

ROOM LAMP (Coupe)
The room lamp assembly is replaced as part of the headlining assembly. Removal And Installation Coupe

Bulb Replacement









1. Using a suitable tool, release the pawls (B) and remove room lamp lens (3) from room lamp (2).
2. Pull bulb (1) straight out to remove.

Room lamp bulb : 12V - 8W

PERSONAL LAMP REAR (Sedan)

Removal





1. Using a suitable tool, release the pawls and remove personal lamp rear lens (3).
2. Release the retainer pawls and remove the personal lamp rear
(1).
Arrow Indicates Vehicle front

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement
1. Using a suitable tool, release the pawls and remove personal lamp rear lens (3)
Arrow Indicates Vehicle front
2. Pull bulb (2) straight out of personal lamp rear (1).

Personal lamp rear bulb : 12V - 8W