Sedan Without Intelligent Key

TRUNK LID OPENER SWITCH





Description
Transmits trunk lid open signal to BCM.




Component Function Check
1.CHECK FUNCTION
With CONSULT-III
Check trunk lid opener switch TR/BD OPEN SW in Data Monitor mode with CONSULT-III.
- When trunk lid opener switch is turned to "ON".





Is the inspection result normal?
YES - Trunk lid opener switch is OK.
NO - Sedan Without Intelligent Key.




Diagnosis Procedure
Regarding Wiring Diagram information, Homelink Universal Transceiver Sedan Without Intelligent Key.
1.CHECK TRUNK LID OPEN INPUT SIGNAL
1. Remove keyfob from key slot.





2. Check voltage between BCM connector and ground.





Is the inspection result normal?
YES - GO TO 5
NO - GO TO 2
2.CHECK TRUNK LID OPENER SWITCH CIRCUIT
1. Disconnect BCM connector.





2. Check continuity between BCM connector and trunk lid opener switch connector.





3. Check continuity between BCM connector and ground.






Is the inspection result normal?
YES - GO TO 3
NO - Repair harness or connector.
3.CHECK TRUNK LID OPENER SWITCH GROUND CIRCUIT





Check continuity between trunk lid opener switch connector and ground.





Is the inspection result normal?
YES - GO TO 4
NO - Repair or replace harness.
4.CHECK TRUNK LID OPENER SWITCH
Sedan Without Intelligent Key.
Is the inspection result normal?
YES - GO TO 5
NO - Replace trunk lid opener switch.
5.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- Inspection End.




Component Inspection
1.CHECK TRUNK LID OPENER SWITCH
1. Turn ignition switch OFF.
2. Disconnect trunk lid opener switch connector.





3. Check continuity between trunk lid opener switch connector.





Is the inspection result normal?
YES - Inspection End.
NO - Replace trunk lid opener switch.