Removal And Installation

WASHER TANK


Removal and Installation


REMOVAL






Arrow indicates Vehicle front


1. Remove the clip (A).

2. Pull out the washer tank inlet (1) from the washer tank.
3. Remove the fender protector RH. Exploded View Removal And Installation, "FENDER
PROTECTOR : Exploded View".
4. Disconnect washer pump connector.
5. Disconnect washer level switch connector.
6. Remove front washer tube and rear washer tube.
7. Remove washer tank mounting bolts.
8. Remove the washer tank from the vehicle.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.