Courtesy Lamp: Service and Repair

INTERIOR ROOM LAMP


Removal and Installation


FRONT ROOM/MAP LAMP ASSEMBLY

Removal





1. Release the metal clips and drop front edge of front room/map lamp assembly (1) away from headlining. Slide front room/map lamp assembly forward in vehicle to clear pawls at rear.
Arrow Indicates Vehicle front
Broken Circle Indicates Pawl
Broken Square Indicates Metal clip
2. Disconnect the connectors, then remove the front room/map lamp assembly.

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool (3), remove the front room/map lamp LH and/or RH lenses (2) as necessary.
2. Pull bulb (1) straight out to remove.






VANITY MIRROR LAMP

Removal
The vanity mirror lamp is replaced as part of the sunvisor assembly. Removal And Installation.

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool (1), remove the vanity mirror lamp LH and/or RH lenses (2) as necessary.
2. Pull bulb (3) straight out to remove.






GLOVE BOX LAMP

Removal





1. Remove the glove box assembly (1). Service and Repair.
2. Rotate glove box lamp socket (3) counterclockwise to remove.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove the glove box lamp. Refer to GLOVE BOX LAMP REMOVAL AND INSTALLATION.
2. Pull bulb (2) straight out to remove.






STEP LAMP

Removal










1. Insert a suitable tool between door finisher (2) and step lamp lens/socket (1) to release the pawls.
2. Disconnect the step lamp connector, then remove step lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove the step lamp lens/socket.
2. Pull the bulb straight out to remove.






FOOT LAMP

Removal
1. Using a suitable tool, release the pawls and remove the foot lamp from the instrument lower panel LH side, if servicing the left hand side foot lamp.





2. Grasp foot lamp socket, then rotate counterclockwise to release from the foot lamp (LH) or from substrate - RH (1) as necessary.

NOTE:
Illustration shown is of the RH side of the vehicle. LH side is similar.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove the foot lamp. Refer to FOOT LAMP REMOVAL AND INSTALLATION
2. Pull bulb (2) straight out to remove.






PERSONAL LAMP

Removal
The personal lamp is replaced as part of the headlining assembly. Removal And Installation.

Installation
Installation is in the reverse order of removal.

Bulb or Lens Replacement





1. Using a suitable tool, release the pawls and remove personal lamp lens (3) from the personal lamp (1).
Arrow Indicates Vehicle front
2. Pull bulb (2) straight out to remove.