Carpet: Service and Repair

FLOOR TRIM


Removal and Installation












REMOVAL
1. Disconnect both the negative and positive battery terminals, then wait at least three minutes.
2. Remove front seats (RH/LH) and rear seat cushion. Driver Seat, Passenger Seat and .
3. Remove center console assembly and bracket. Removal And Installation.
4. Remove parking brake control. Removal and Installation.
5. Remove instrument lower finisher and disconnect connector. Component Parts.
6. Remove front kicking plates (RH/LH), center pillar lower finishers (RH/LH), and both upper and lower rear kicking plates (RH/LH). Body Side Trim.
7. Remove front seat belt lower anchors (RH/LH). Front Seat Belt.
8. Remove diagnosis sensor unit. Service and Repair.
9. Remove floor carpet hook.
10. Remove instrument lower covers (RH/LH). Component Parts.
11. Remove floor trim through door opening.
12. Remove floor spacers (RH/LH fronts & centers and rear).

INSTALLATION
Installation is in the reverse order of removal.