Air Duct: Service and Repair

DUCTS AND GRILLES


Removal and Installation











Floor Ducts - Canada Only











CENTER VENTILATOR GRILLES

Removal
1. Remove cluster lid C. Component Parts.





2. Remove center ventilator grills (1) from cluster lid C using suitable tool (A).

Installation
Installation is in the reverse order of removal.

SIDE VENTILATOR GRILLES (LH/RH)

Removal
1. Remove side ventilator assembly (LH). Component Parts.





2. Remove side ventilator grille (LH) (1) using suitable tool (A).
3. Remove side ventilator assembly (RH). Component Parts.
4. Remove the side ventilator grille (RH) screw.





5. Remove side ventilator grille (RH) (1) using suitable tool (A).

Installation
Installation is in the reverse order of removal.

DEFROSTER NOZZLE AND SIDE DEFROSTER DUCTS (LH/RH)











Removal
1. Remove instrument upper finisher. Component Parts.
2. Remove screws and then remove side defroster duct (RH) and side defroster duct (LH).
3. Remove screws, and then remove defroster nozzle.

Installation
Installation is in the reverse order of removal.

SIDE VENTILATOR DUCTS

Removal
1. Remove instrument panel and pad. Component Parts.





2. Remove screws (A), and then remove side ventilator duct (left)
(1).





3. Remove screw (A) and clip (B), and then remove side ventilator duct (right) (1).

Installation
Installation is in the reverse order of removal.

CENTER VENTILATOR DUCTS

Removal
1. Remove instrument panel & pad. Component Parts.





2. Remove screws (A), and then remove center ventilator ducts
(1).

Installation
Installation is in the reverse order of removal.

SIDE FOOT DUCTS

NOTE:
The side foot ducts are part of the A/C unit assembly case.

Removal
1. Remove A/C unit assembly. A/C Unit Assembly.





2. Remove screws (A), and then remove side foot duct (LH) (1).





3. Remove screws (A), and then remove side foot duct (RH) (1).

Installation
Installation is in the reverse order of removal.

FLOOR DUCTS

Removal
1. Remove front seats. Driver Seat .
2. Remove center console assembly. Component Parts.





3. Disengage pawls (A), and then remove front floor duct (1).
4. Peel back floor trim to a point where floor duct is visible.





5. Remove clips (A), and then remove rear floor duct (left) (1) and rear floor duct (right) (2).

Installation
Installation is in the reverse order of removal.