Cluster Lid C

CLUSTER LID C

Removal and Installation


REMOVAL


CAUTION:
Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect components from damage.
1.Remove the center ventilator grilles. Center Ventilator Grilles.





2.Release the pawls using a suitable tool and remove cluster lid D
(1).
Broken Circle indicates: Pawl

3.Remove the CVT or M/T finisher. CVT Finisher (CVT) or Exploded View (M/T).
4.Release the clips using a suitable tool and remove the finisher/storage bin.





5.Remove cluster lid C upper screws (A).
IP





6.Remove cluster lid C lower screws (A), then pull cluster lid C outward.
7.Disconnect the audio unit connectors.
8.Disconnect the front air control unit connector.
9.Disconnect the harness connectors.
10.Remove the audio unit from cluster lid C if necessary. Base Audio (BASE
AUDIO), Bose Audio Without Navigation (BOSE AUDIO WITHOUT NAVIGATION) or Service and Repair (BOSE AUDIO WITH NAVIGATION).

INSTALLATION

Installation is in the reverse order of removal.