With Intelligent Key System

INSPECTION AND ADJUSTMENT

ECM : Special Repair Requirement


1. PERFORM ECM RECOMMUNICATING FUNCTION

1.Install ECM.
2.Contact backside of the registered Intelligent Key* to push-button ignition switch while brake pedal is depressed, then turn ignition switch ON.
*: To perform this step, use the key that is used before performing ECM replacement.
3.Maintain ignition switch in the ON position for at least 5 seconds.
4.Turn ignition switch OFF.
5.Start engine.
- GO TO 2.

2. PERFORM ADDITIONAL SERVICE PROCEDURE WHEN REPLACING ECM

performing the following procedure.
- HR-18DE (Except for California): "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT :
Special Repair Requirement"
- HR-18DE (For California): "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special
Repair Requirement"
- END