Removal And Installation

WASHER TANK

Removal and Installation


REMOVAL






1.Remove the clip (A).

White arrow indicates : Vehicle front

2.Pull out the washer tank inlet (1) from the washer tank.
3.Remove the fender protector RH. Exploded View.
4.Disconnect washer pump connector.
5.Disconnect washer level switch connector.
6.Remove front washer tube and rear washer tube.
7.Remove washer tank mounting bolts.
8.Remove the washer tank from the vehicle.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.