P1722

P1722 VEHICLE SPEED

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


CAUTION:
Always drive vehicle at a safe speed.

1. PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, power switch OFF and wait for at least
10 seconds, then perform the next test.
- GO TO 2.

2. PERFORM DTC CONFIRMATION PROCEDURE

With CONSULT
1.Set the vehicle to READY.
2.Drive the vehicle at 30 km/h (19 MPH) or more for 60 seconds.
3.Stop the vehicle.
4.Check DTC.
Is "P1722" detected?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK DTC OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

With CONSULT
1.Power switch ON.
2.Perform "Self Diagnostic Results" in "ABS".
Is any DTC detected?
YES- Check DTC detected item.
NO- GO TO 2.

2. CHECK DTC OF VCM

With CONSULT
1.Power switch ON.
2.Perform "Self Diagnostic Results" in "EV/HEV".
Is any DTC detected?
YES- Check DTC detected item.
NO- GO TO 3.

3. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
Is the inspection result normal?
YES- Replace the electric shift control module. Refer to "Removal and Installation" Removal And Installation.
NO- Repair or replace damaged parts.