P18A9

P18A9 PARKING ACTUATOR FUNCTION

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, power switch OFF and wait for at least
10 seconds, then perform the next test.
- GO TO 2.

2. PERFORM DTC CONFIRMATION PROCEDURE

With CONSULT
1.Set the vehicle to READY.
2.Shift the selector lever to N position and wait for 10 seconds or more.
3.Press the P position switch to shift to P position and wait for 10 seconds or more.
4.Check DTC.
Is "P18A9" detected?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. P POSITION LEARNING

Perform P position learning. Refer to "Work Procedure" Work Procedure.
- GO TO 2.

2. SELF DIADNOSTIC

Perform "DTC CONFIRMATION PROCEDURE". Refer to "DTC Logic" .
Is "P18A9" detected?
YES- Replace the reduction gear due to malfunction in the parking actuator. Refer to "Removal and Installation"
NO- INSPECTION END