P18AE

P18AE STUCK IN SHIFT

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


CAUTION:
""Diagnosis Procedure" " must be performed before starting "DTC CONFIRMATION PROCEDURE" .

1. PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, power switch OFF and wait for at least
10 seconds, then perform the next test.
- GO TO 2.

2. PERFORM DTC CONFIRMATION PROCEDURE

With CONSULT
1.Set the vehicle to READY.
2.Select "Data Monitor" in "SHIFT".
3.Select "RANGE POSITION".
4.Shift the selector lever as follows.
- P N P
5.Repeat step 4 five more times.
6.Check DTC.
Is "P18AE" detected?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. REPLACE REDUCTION GEAR

Replace the reduction gear due to malfunction in the parking actuator. Refer to "Removal and Installation" .
- END