Side Ventilator Grille

DUCT AND GRILLE

SIDE VENTILATOR GRILLE : Removal and Installation


REMOVAL

Driver side
1.Remove instrument mask LH. Refer to "Removal and Installation" Removal And Installation.
2.Remove instrument side panel LH. Refer to "INSTRUMENT SIDE PANEL : Removal and Installation" Instrument Side Panel.
3.Remove front pillar garnish LH. Refer to "FRONT PILLAR GARNISH : Removal and Installation" Front Pillar Garnish.
4.Remove instrument lower panel LH. Refer to "Removal and Installation" Removal And Installation.





5.Disengage side ventilator grille LH (1) fixing pawls and metal clips.

6.Disconnect switch connector, and then remove side ventilator grille LH from instrument panel assembly.
Passenger side
1.Remove instrument mask RH. Refer to "Removal and Installation" Removal And Installation.
2.Remove instrument side panel RH. Refer to "INSTRUMENT SIDE PANEL : Removal and Installation" Instrument Side Panel.
3.Remove front pillar garnish RH. Refer to "FRONT PILLAR GARNISH : Removal and Installation" Front Pillar Garnish.





4.Remove fixing screw (A) from side ventilator grille RH (1).





5.Apply protective tape (B) on the part to protect it from damage.






6.Disengage side ventilator grille RH (1) fixing pawls using a remover tool (A).

7.Remove side ventilator grille RH from instrument panel assembly.

INSTALLATION

Install in the reverse order of removal.