Inlet Port Memory Function (REC)

SYSTEM SETTING

Inlet Port Memory Function (REC)


DESCRIPTION

- If the ignition switch is turned to the OFF position while the intake switch is set to ON (recirculation), "Perform the memory" or "Do not perform the memory" of intake switch ON (recirculation) condition can be selected.
- If "Perform the memory" is set, the intake switch is ON (recirculation) when turning the ignition switch to the
ON position again.
- If "Do not perform the memory" is set, the air inlets is controlled automatically when turning the ignition switch to the ON position again.

HOW TO SET

With CONSULT
Perform the "REC MEMORY SET" of HVAC work support item.





NOTE:
When the 12V battery cable is disconnected from the negative terminal or when the 12V battery voltage becomes 10 V or less, the setting of the REC memory function may be cancelled.