Removal And Installation

ELECTRIC SHIFT SELECTOR

Removal and Installation


CAUTION:





- As part A in the figure contains a strong magnet, persons with an electro-medical apparatus should keep it away from his/her body. Otherwise it may cause the electro-medical apparatus to malfunction.


- Keep it away from magnetic objects such as magnetic cards and metal products (e.g. watches).
- Never subject the electric shift selector to impact by dropping or hitting, water splash or high humidity.

REMOVAL

1.Disconnect the negative cable from 12V battery. Refer to "Precaution for Removing 12V Battery" .
2.Remove the console finisher assembly. Refer to "Exploded View" Exploded View.
3.Disconnect the selector indicator connector.
4.Disconnect the electric parking brake connector.
5.Remove the console body assembly. Refer to "Exploded View" Exploded View.
6.Remove body harness clip from electric shift selector.
7.Remove electric shift selector fix bolts.
8.Disconnect the electric shift sensor connector.

CAUTION:
Never disconnect the P position switch connector.
9.Remove the electric shift selector from the vehicle.

INSTALLATION

Note the following, and install in the reverse order of removal.





Check the orientation instruction on the side of the body bracket and install the part so that the direction of the arrow points toward the vehicle front.